Skip to main content
This document describes the rules of Echoes of Astra for a two-player game. Other formats may change rules listed below. Rules and subrules are identified by number for reference during play. Examples illustrate the rules to which they relate.

Additional Links

Quickstart Rules for new players

Organizer Resources

Game Overview

Each player represents a Sovereign and deploys units to control combat zones. Units in controlled combat zones earn victory points (VP) through scoring. The turn player wins only if they have at least 20 VP at the victory check during their end phase.

100. Deck Construction

100.1.a. The five affinities in Echoes of Astra are Lux, Nox, Solara, Caelum, and Terra. Cards that do not belong to a specific affinity are Neutral. A deck may contain cards from no more than two of the five affinities. Neutral cards do not count toward this restriction and may be included in any deck.
Example: A Caelum and Nox deck may contain Caelum, Nox, and Neutral cards. It may not contain Solara, Terra, or Lux cards.
100.1.b. A deck has a minimum size of 50 cards. There is no maximum deck size. 100.1.c. A deck may contain no more than three copies of a card with the same name. 100.1.d. A deck may include a side-board. If it does, the side-board shares the same affinity restriction (100.1.a.) and copy restriction (100.1.c.) as the deck. The amount of copies of a card between the deck and the side-board are tallied together. A side-board has a maximum size of 10 cards.
Example: A deck cannot contain 3 copies of Brand in the deck and another copy of Brand in the side-board, as that constitutes 4 copies of Brand across the whole deck.

100.2. Side-board

100.2.a. In organized play, side-boarding is the modification of a player’s deck using submitted and approved sideboard cards. When side-boarding, a player may add cards from their side-board to their deck and/or remove cards from their deck to their side-board. Side-boarding is permitted only between games or between matches. 100.2.b. In a best-of-three match, a player may side-board between games. 100.2.c. In a best-of-one match, a player may side-board between matches, before the game begins. Players may first request to know their opponent’s deck affinity makeup to make an informed decision. 100.2.d. All deck building rules still apply after side-boarding. Your deck and side-board must remain legal after all changes.
Example: When side-boarding, you can’t side out cards to make your deck to go below the 50-card minimum. You can side out 10 cards from a 60 card deck if your sideboard is empty.

101. Card Layout

UI Tutorial Card Details

101.1. Numbers and Symbols

101.1.a. Base stats are the values used for game calculations before bonuses, effects, and other modifications are applied. These are represented by the text printed on the card. 101.1.b. A card’s cost, displayed in its upper-left corner, is the amount of supply required to play the card. 101.1.c. A card’s name, displayed at the top center, identifies copies of that card for deck construction and the Renowned rules. Partial matches of a name do not count as copies - only exact matches do.
Example: While Valrathian Zealot and Valrathian Commissar share the word “Valrathian”, the names are not an exact match to each other. They don’t count as copies of each other.
101.1.d. A card’s affinity is indicated by the symbol in its upper-right corner and the color of its frame. 101.1.e. A card’s type line, below its name, identifies its primary type and any supertypes or subtypes. 101.1.f. A card may have only one primary type: Unit, Tactic, Territory, or Item. A card may have any number of subtypes and supertypes. 101.1.g. Influence determines how many victory points a unit earns for its controller when it scores. 101.1.h. Attack is the combat stat referred to as “attack.” It represents the amount of damage a unit deals during combat. 101.1.i. Health is the combat stat referred to as “health.” It represents the amount of damage a unit can have marked on it before dying.

101.2. Calculations

101.2.a. A unit’s attack and health may be expressed as A/B, where A is its attack and B is its health. 101.2.b. The symbol X may appear in place of a stat value. Its value is determined during the game by the effects described in the card’s text box. 101.2.c. Card stats and game calculations use integers. If a calculation results in a decimal number, round down to the nearest integer. 101.2.d. Modifiers may reduce a stat below 0. A negative stat is treated as 0 when used in a calculation. See rule 310.2.

102. Cards

102.1. Players bring cards into a game as part of a legally constructed deck. A card refers to the physical card. 102.1.a. A card’s owner is the player who brought that card into the game as part of their deck. 102.1.b. At the end of a match, or upon concession, all cards are returned to their owners’ decks. 102.2. A permanent is a played instance of a card. Unit, territory, and item cards create permanents on the battlefield, represented by the cards themselves. 102.2.a. To create a permanent is to produce an instance of a card or token that did not previously exist in the game. 102.2.a.1. Unless a zone is specified, a created non-territory permanent enters its creator’s staging area under that player’s control, exhausted. A created territory permanent enters a combat zone of its controller’s choice. 102.2.b. A permanent may be referred to by its card’s name or generically by its subtype.
Example: Playing Sylvan Archer creates a permanent with that name. On the battlefield, it is a unit. A Noxhaven Laboratory played in a combat zone is a territory.
102.2.c. A permanent ceases to exist when it leaves the battlefield. The card is then reset: its effects, bonuses, counters, and modifications to ability text are removed. 102.2.d. The designation “permanent card” refers to any unit, territory or item card.

102.3. Unit

102.3.a. A unit is a permanent created when a Unit card is played. 102.3.b. Units enter the staging area exhausted unless an ability or effect specifies otherwise. 102.3.c. Units can be damaged. When damage is dealt to a unit, it is marked on it until an effect removes that damage (usually happens when damage is removed at end of turn). 102.3.c.1. If a unit has damage marked on it equal to or greater than its health stat, it is destroyed. 102.3.c.2. If a unit’s health stat is 0, it is destroyed. 102.3.d. A unit is either ready, represented by an upright card, or exhausted, represented by a sideways card. Units enter the battlefield exhausted by default. 102.3.e. During its controller’s main phase, a unit may attack or retreat only while ready. Its controller may activate an ability while the unit is ready or exhausted, provided all activation costs can be paid. An exhausted unit cannot pay a cost that requires it to exhaust. 102.3.f. Attack: A ready unit may attack from the staging area into a combat zone. An attack initiates a combat phase even if that combat zone is empty.
  • 102.3.f.1. First, the attacking unit must be permitted to target the unit occupying the zone, if any. Second, it must be permitted to attack the zone itself. If either requirement is not satisfied, the attack is illegal and does not proceed.
  • 102.3.f.2. A player cannot attack a combat zone they already control.
  • 102.3.f.3. A unit cannot attack from one combat zone into another unless a rule or ability, such as Flanking, permits it.
102.3.g. Retreat: A ready unit in a combat zone may retreat. Move it to the staging area, then exhaust it.
  • 102.3.g.1. Forced retreat or movement caused by an ability effect may bypass the requirement that the unit be ready.
Example: An exhausted Sylvan Archer is in a combat zone. Its controller responds to an enemy attack with Swift Acrobatics (“Force retreat target friendly unit in a combat zone…”). The Archer retreats even though it is exhausted.
102.3.h. Activate ability. The following rules govern unit abilities.
  • 102.3.h.1. An ability without a cost or trigger is passive and becomes active as soon as the unit is on the battlefield.
  • 102.3.h.2. Some passive abilities of unit cards work from zones other than the battlefield. Abilities that allow you to play a unit card from a zone other than your hand work from its respective zone.
    Example: Guinea Pig’s ability “You can play this card from your graveyard.” works from graveyards, even though it isn’t on the battlefield.
  • 102.3.h.3. A unit’s controller may activate an activated ability by paying all its costs. The ability may be activated during that player’s main phase or as a Counter response during any player’s counter step. See rule 305.2.
  • 102.3.h.4. An activated ability’s costs appear before a colon (:). Costs may include sacrificing a card, paying VP, exhausting a card, or paying supply. Some costs are represented by an icon.
    • 102.3.h.4.a. Exhaust this unit is represented by an arrow pointing clockwise. This icon means “Exhaust this unit”.
    • 102.3.h.4.b Supply cost is represented by a number in a circle. This icon means “Pay N supply”.
Example: Valrathian Commissar: {Exhaust}, Sacrifice a unit: Target opponent loses 1 victory point.
102.3.i. Move. Movement instructed by an effect is not a player action. Move the specified card or unit to the zone stated by that effect. 102.3.i.1. Movement caused by an effect does not, by itself, change a unit’s ready or exhausted state. If the effect instructs a retreat or force retreat, return the unit to its controller’s staging area exhausted. Follow any other explicit readiness instruction in the effect.

102.4. Tactic

102.4.a. A Tactic card produces an immediate effect. Resolve its ability text, then put the card into the graveyard. 102.4.b. A Tactic - Counter card may be played during the counter step of combat in response to an opponent’s attack or another Counter response. (It can still be played at any time you could play a normal Tactic.)

102.5. Territory

102.5.a. Territories are played directly into combat zones. A territory’s abilities apply to its controller unless its text specifies otherwise. 102.5.b. A player may play a territory face up or face down. Regardless of privacy state, the territory is created as a permanent. 102.5.b.1. To play a territory face up, the player pays its supply cost as for any other card. 102.5.b.2. To play a territory face down, the player does not pay its supply cost. 102.5.b.3. A player may pay a face-down territory’s supply cost to flip it face up, either as a Counter response or as an action during that player’s main phase. A territory that was played or turned face-down this turn can’t be flipped this way. 102.5.c. If a territory enters a combat zone containing another friendly territory, the existing territory is destroyed and the new territory replaces it. Each player may have no more than one territory in each combat zone.

102.6. Item

102.6.a. Items are permanents that provide continuing effects while on the battlefield. Equipment is the most common item subtype. 102.6.b.When playing an Equipment card, the owner attaches the card to a unit in their staging area. This is usually represented by tucking the Equipment card under the unit. That Equipment card becomes equipped to that unit. 102.6.c. An equipped unit gains +X/+Y, where X is the Equipment’s attack bonus and Y is the Equipment’s health bonus. It also gains influence equal to the Equipment’s influence bonus. 102.6.d. All Equipment equipped to a unit will move with it as it moves between zones on the battlefield. 102.6.e. When an equipped unit leaves the battlefield, all Equipment attached to it is destroyed. 102.6.f. There is no limit to the number of equipment items that may be attached to a unit.

102.7. Renowned Supertype

102.7.a. Renowned is a supertype that can be found on permanent cards. 102.7.b. A player cannot play a Renowned card if that player already controls a Renowned permanent with the same name. 102.7.c. If a player would gain control of a Renowned permanent while they control another Renowned permanent with the same name, the Renowned permanent they had control of the longest is immediately sacrificed before gaining control of the new permanent.

102.8. Token

102.8.a. A token represents a permanent created by ability text. The token or the effect creating it normally specifies its characteristics.
Examples: A Drone token may be described as “it’s a 1/1 Drone token with 0 influence”; an Experiment token may be described as “it’s a 2/2 unit token with 0 influence”.
102.8.b. A token’s supply cost is always 0. Tokens enter exhausted. 102.8.c. A token’s owner is the player who created it. 102.8.d. A token exists only on the battlefield. If it is destroyed or otherwise removed from the battlefield, it ceases to exist in the game. Its physical representation may be returned to the token pile from which it came.

200. Game Setup

Perform the following steps in order. 200.1. Arrange the board. Arrange the zones according to the game board diagram and rule 201. 200.2. Determine the starting player. Randomly select a player by a coin flip or die roll. The selected player chooses whether to take the first or second turn. 200.3. Draw opening hands. Each player shuffles their deck and draws six cards. 200.3.a. Mulligan. Each player may shuffle their entire opening hand into their deck and draw six new cards. Each player may do this only once per game. 200.4. Establish starting supply. Each player starts with one supply by putting one card from their hand face down into their supply area, then drawing one replacement card. 200.5. Begin play. The starting player takes the first turn and skips the draw phase of that turn.

201. Game Board

201.1. The board should provide three combat zones between the players’ staging areas. The starting player may use their own combat zone indicators. 201.2. The diagram below shows the recommended standard layout. A player using an alternative layout must ensure that all zones are clearly identifiable to both players. UI Tutorial Layout 201.2.a. Each player manages their own zones and the movement of cards into and out of those zones. 201.2.b. A player’s supply area contains that player’s supply cards. 201.3. The three combat zones are shared. Both players have access to them. 201.4. Only one unit may control a combat zone at a time. When an enemy unit enters an occupied combat zone, combat occurs. If a friendly unit enters a combat zone already controlled by a friendly unit, the noncontrolling unit immediately retreats to the staging area.

300. Game Mechanics

301.1. Card Privacy

301.1.a. Hidden information is not available for any player to inspect freely. Hidden cards are kept face down or in a pile of hidden cards, such as the deck. 301.1.b. Private information is available only to the card’s owner. That player may freely inspect their private cards, including cards in their hand. 301.1.c. Public information includes cards that have been revealed or played face up. A publicly revealed card must be face up and visible to all players. 301.1.c.1. A player may request to read a public card. If a card is moved or repositioned for inspection, it should be returned to its previous position before play continues.

301.2. Privacy State Changes

301.2.a. A card’s privacy state may change when it moves between zones to match the destination zone’s privacy level. 301.2.b. A public card moved into the deck becomes hidden. A public card moved into the supply area becomes private. 301.2.c. The banish pile cannot contain hidden cards. A hidden card that is banished becomes private, and its owner may inspect it.

302. The Field of Play (Battlefield)

302.1. The battlefield consists of the zones in which unit permanents may exist: both players’ staging areas and all combat zones. 302.1.a. The deck, hand, supply area, graveyard, and banish pile are not part of the battlefield. 302.1.b. A token is a permanent only while on the battlefield. Removing a token from the battlefield removes it from the game.

302.2. Combat Zones (Public)

302.2.a. Combat zones are shared zones in the center of the field. A standard game has three combat zones, each of which either player may control. 302.2.b. Occupation and control. A player occupies and controls a combat zone when a unit they control is alone in that zone. 302.2.c. A unit may perform actions, including exhausting, sacrificing, or retreating, while in a combat zone. 302.2.d. A player plays territories from their hand directly into a combat zone, either face up (public) or face down (private). See rule 102.5. 302.2.e. Each combat zone may contain no more than one territory per player. 302.2.f. An attacking unit and a unit controlling a combat zone are both considered to be in that zone. During combat, both the attacker and the defender are in the combat zone.

302.3. Staging Area (Public)

302.3.a. Each player has a separate staging area. Units, items, and tactics are played in that player’s staging area. 302.3.b. Units enter the staging area exhausted unless an ability or effect specifies otherwise.

302.4. Deck (Hidden)

302.4.a. A player’s deck is the face-down pile of cards brought into the game. It must satisfy the deck construction rules of the format being played.

302.5. Hand (Private)

302.5.a. Each player has a separate hand. 302.5.b. An effect may target cards in a hand if it specifies that zone as a legal target. 302.5.c. The maximum hand size is 10 cards. A player with more than 10 cards in hand at the end of their turn must discard until they have 10 cards in hand.

302.6. Supply Area (Private)

302.6.a. Each player has a separate supply area. 302.6.b. A card sent to the supply area is turned face down and becomes a supply card, whether it was placed there by extending supply or by an ability effect.

302.7. Graveyard (Public)

302.7.a. Each player has a separate graveyard. 302.7.b. A destroyed, discarded, or sacrificed card is put into its owner’s graveyard and becomes public. A tactic is put into its owner’s graveyard after its effect resolves.

302.8. Banish Pile (Public/Private)

302.8.a. Each player has a separate banish pile. 302.8.b. The banish pile holds cards removed from play through banishment. Effects may also use it to hold cards temporarily while those effects are being processed. 302.8.c. A banished card retains its previous privacy state. See also rule 301.2.c concerning hidden cards.

303. Supply Mechanics

303.1. Extending Supply

303.1.a. Once during their main phase each turn, a player may put a card from their hand face down into their supply area. That supply card enters ready and may be used during that turn. 303.1.b. When a player extends supply in this manner, that player draws one replacement card. 303.1.c. Abilities such as Airdrop may put additional cards into the supply area. This does not count as extending supply and does not cause a replacement draw.

303.2. Supply Consumption

303.2.a. Exhausting a supply card produces one floating supply for that player to spend during the turn. 303.2.a.1. The turn player may exhaust cards in their supply area at any time to produce floating supply. 303.2.a.2. Floating supply remains available until the end of the turn player’s end phase. 303.2.a.3. Any player may exhaust supply cards at any time to generate the supply needed to play a legal card. 303.2.b. Card abilities may provide other ways to produce floating supply. 303.2.b.1. A card is not a supply card merely because it has an ability that produces supply. A player cannot freely exhaust such a card to pay for another card.

304. Playing a Card

304.1. To play a card is to pay all required costs to put that card onto the battlefield. 304.1.a. A player normally plays cards from their hand during their own main phase, unless another rule or effect permits otherwise, as with Counter cards. 304.1.a.1. Extending supply is not playing a card. 304.1.b. When a card is successfully played, its “On Play” abilities trigger, followed by its “On Enter” abilities.

304.2. Resource Costs

304.2.a. Supply cost. A card’s supply cost appears in its upper-left corner. To play the card, the player must spend that amount of supply. 304.2.b. Additional costs. A card may specify additional costs, such as sacrificing a unit or discarding a card. For a normal play, pay these costs as the card is played. For a Counter response, pay all required supply and additional costs when adding the card to the Counter stack, not again when its entry resolves. This payment does not itself trigger On Play or On Enter abilities. 304.2.c. Free play. If an effect permits a card to be played “for free,” neither its supply cost nor its additional costs need to be paid.

304.3. Timing

304.3.a. Main phase. A player may play cards only during their own main phase, unless an ability’s resolution instructs otherwise. 304.3.b. Counter cards. Counter cards may be played during the counter step of combat in response to an opponent’s attack or another Counter response. 304.3.c. Passive abilities. An ability with neither an activation cost nor a trigger condition is passive. A passive ability applies continuously while its source is on the battlefield, subject to any conditions in its text. An activated or triggered ability is not passive merely because it names no phase.

304.4. Target Requirements

304.4.a. A tactic whose ability requires a target cannot be played unless a legal target is available. 304.4.a.1. If a player attempts to play a tactic without a legal target, the game state should be restored to the point immediately before that attempt.

304.5. Placement Rules

304.5.a. Units enter the player’s staging area exhausted. 304.5.b. Items enter the staging area ready to be equipped. 304.5.c. Territories are played directly into a combat zone. 304.5.d. Tactics produce their effects immediately and are then put into the graveyard.

304.6. Play Restrictions

304.6.a. Game-state restrictions. A card may impose a condition on when it may be played, such as “Play only if you control three units”. The card cannot be played unless that condition is satisfied. 304.6.b. Renowned. A player cannot play a Renowned card while they control a Renowned card with the same name. See rule 102.7. 304.6.c. If a card is played in violation of a play restriction or procedure, the players may agree to restore the game state to the point immediately before the illegal play.

305. Card Abilities

305.1. Card Text Precedence

305.1.a. If a card’s ability text contradicts these rules, the card’s text takes precedence. 305.1.b. In ability text, “card” refers to cards in a player’s deck and other non-battlefield zones. 305.1.c. If one effect prohibits an action and another permits it, the prohibition takes precedence. “Can’t” takes precedence over “can.” 305.1.d. When resolving an effect, perform as much of its instructions as possible and ignore instructions that cannot be performed. 305.1.e. The full wording of keywords and key phrases in the Comprehensive Rules takes precedence over reminder text. Reminder text is text written in italics (like this). They serve only as reminders and do not have any direct rules bearing. See rule 308 for simultaneous effects and rule 801 for trigger terminology.

305.2. Unit Abilities in the Counter Step

305.2.a. An ability with a cost before a colon (:) may be activated as a Counter response during the counter step. 305.2.a.1. The player must be able to pay all activation costs, including any required sacrifice, supply payment, or exhaustion. 305.2.a.2. During the counter step, such an activation must respond to an attack or an opponent’s Counter response.

305.3. Stacking Abilities

305.3.a. A unit may have multiple instances of the same ability from different sources. Each instance applies when the ability is used or triggered.
Example: A Canopy Stalker with Impede 1 (“On Defend: Attacking enemy unit gets -1/-0 this combat”) occupies a zone with an Escape Route territory granting Impede 2. An enemy unit with 4 attack attacks the Stalker. The two Impede effects apply separately, reducing its attack by 1 and by 2. The attacker deals 1 combat damage.

306. Selection & Targeting

The following rules govern the selection of targets for cards and abilities.

306.1. Basic Targeting Rules

306.1.a. Visibility. A player may target only cards visible to that player as public information. 306.1.b. Declaration. If an effect uses the word “target,” the player must declare its targets when activating the ability, before the effect resolves. 306.1.c. Unavailable or illegal targets. If no target is available, or a chosen target is no longer legal when the effect resolves, the targeted portion of that effect fails to resolve.

306.2. Target Restrictions

306.2.a. Zone restrictions. Cards may target only cards in staging areas or combat zones unless their text explicitly permits another zone. 306.2.b. Type restrictions. A target must satisfy any specified type restriction, such as “target unit” or “target equipment.” 306.2.c. Controller restrictions. “Friendly” refers to a card controlled by the player using the effect. “Enemy” refers to a card controlled by an opponent. 306.2.d. Targeting prohibitions. An ability stating that a card cannot be targeted by a particular effect overrides the normal targeting permissions for that effect. 306.2.e. Prohibited actions. An effect instructing an action does not override an effect prohibiting that action.
Example: An effect stating “this unit attacks target combat zone” does not permit an attack against a zone that another effect prohibits the unit from attacking.

306.3. Global Effects

306.3.a. Effects using phrases such as “all units” or “each territory” may affect multiple cards without targeting them. Such effects are not prevented by restrictions that prohibit targeting.

307. Counter Step / Effect Stack

307.1. The Counter stack is the sequence of responses added during the counter step of combat. 307.1.a. The defending player has priority to make the first Counter response to an attack. 307.1.b. If the attacked zone has no defender, an opponent may make the first Counter response. In multiplayer games, priority passes around the table until a player elects to respond. 307.1.c. After a player makes a Counter response, opponents may make Counter responses of their own. 307.1.c.1. Each new response is placed on top of the existing stack. 307.1.d. Once stack resolution begins, resolve entries from top to bottom in last-in, first-out order. Players cannot add new Counter responses between resolving entries. Triggered abilities arising during resolution are added and resolved under rule 307.3 before continuing with the remaining entries. 307.1.e. An effect on the stack exists independently of the ability that generated it. Removing the source unit from the battlefield does not remove its effect from the stack. 307.2. The following qualify as Counter responses: 307.2.a. Playing a Tactic - Counter card. 307.2.b. Turning a face-down territory face up. 307.2.c. Playing a unit with Swift. 307.2.d. Activating a unit ability for which all costs can be paid, such as Valrathian Commissar’s sacrifice ability. See rule 102.3. 307.3. Abilities triggered during stack resolution. 307.3.a. A triggered ability may have its effect be added to the top of the stack after resolution begins. For example, an On Death effect may be added as a new layer if a unit dies during effect stack resolution. 307.3.b. A target becoming illegal during resolution does not remove the remaining Counter responses from the stack. Those responses still resolve, although they may produce no effect.

308. Order of Operations

308.1. If abilities belonging to multiple players trigger simultaneously, the turn player’s ability effects are put onto the resolution stack first. Then, the non-active player’s are added onto the stack. After all simultaneous triggers have been added, resolve the stack. 308.1.a. The acronym “APNAP” (Active player, non-active player) can be used as a reminder of ability trigger order for simultaneous activation. 308.2. If multiple abilities controlled by the same player trigger simultaneously, that player chooses and declares their order on the stack before resolution begins.

308.3. Effect Resolution Order

308.3.a. A card effect is the result of card text, whether activated, triggered, or passively applied. 308.3.b. Abilities that trigger in sequence are added to an effect stack. When no further effects are being added, resolve the top effect first, then proceed downward in last-in, first-out order. 308.3.c. A Counter card is placed on the stack during the counter step. On Play and On Enter effects only trigger when its entry resolves. Once that play resolves, the card’s abilities trigger and are added to the stack.
Example: Two units destroy each other in combat, and each has an “On Death” ability. The turn player’s ability adds Effect A to the stack first. The opponent’s ability then adds Effect B. Effect B resolves before Effect A.
Example: Two cards owned by the same player enter the battlefield simultaneously and have “On Enter” abilities. That player chooses the trigger order of those simultaneous abilities.
308.3.d. In multiplayer games, if an effect would resolve on multiple players’ permanents simultaneously, those resolutions may be processed clockwise, beginning with the turn player.
Extended example: Counter resolution and a tactic-triggered bonus
  1. Player A controls a 3/2 Synthal Vampire in a combat zone. It has “Whenever you play a tactic during your turn, this unit gets +1/+1 until end of turn.”
  2. During their turn, Player A plays Yako Illusionist, which has “On Enter: Choose a target enemy unit in an opponent’s staging area and ready it. It immediately attacks a combat zone of your choosing.” The ability targets Player B’s Nocturne Agent.
  3. The 3/3 Nocturne Agent attacks Synthal Vampire.
  4. Player A responds with Enrage: “Give target friendly unit +1/+0 until end of turn and ready it.” The intended target is Synthal Vampire. Enrage and the Vampire’s ability would together make it 5/3.
  5. Player B responds with Emergency Extraction: “Return a friendly unit or item to your hand.” The intended unit is Nocturne Agent.
  6. With combat pending, the Counter stack contains Enrage below Emergency Extraction. Emergency Extraction resolves first and returns Nocturne Agent to Player B’s hand.
  7. Enrage’s ability is activated. Before it resolves, the Synthal Vampire’s ability triggers and is added to the stack.
  8. The Vampire’s effect resolves first, giving it +1/+1 until end of turn.
  9. Enrage’s effect is next to resolve, giving Synthal Vampire +1/+0 until end of turn.
  10. Nocturne Agent is no longer in the combat zone. Combat proceeds to resolution without combat damage and without a further change of control.

308.4. “Each player” Order

308.4.a. An instruction stating “Each player does [X]” is considered a simultaneous ability trigger for all players. When order matters, the turn player would perform the effect first, followed by opponent(s) in turn order.
Example: Exterminate’s “Destroy all units” ability will destroy all units at the same time. But if multiple On Death abilities would trigger, then treat the turn player as the first to trigger abilities, then proceed to the opponent (in turn order if playing multiplayer). Each On Death effect goes on the stack until no more trigger. Then resolve the On Deaths top down (Player 4 > 3 > 2 > 1).

308.5. “On Death”, “Whenever unit dies”, “Destroyed”

308.5.a. A unit dies when it is destroyed. Destroyed describes a card being sent to the graveyard. See rule 802. 308.5.b. When a unit is destroyed, determine which death-triggered abilities trigger using the battlefield state immediately before it leaves, including abilities of the unit, its attached equipment, and other permanents. Put the unit into its owner’s graveyard and destroy its attached equipment. Add the recorded triggers to the stack in the order specified by rule 308.1; then resolve them. 308.5.c. Destroy the unit’s attached equipment.
Example: Fearless Whelp, equipped with Lifecycle Katana, dies while defending a zone containing Elorhain, the Ancestral Crown.
  1. Lifecycle Katana, Elorhain the Ancestral Crown, and Fearless Whelp each have an ability triggered on Whelp’s death. The player chooses their trigger order.
  2. The player may order those effects so that Fearless Whelp and Elorhain’s effect draws 2 cards before Lifecycle Katana’s effect puts Fearless Whelp on top of owner’s deck.

309. Scoring and Victory Points (VP)

309.1. Each player begins with 0 victory points (VP). A player wins the game by having 20 VP during the victory check in their end phase. 309.1.a. A player’s VP total cannot be less than 0. A player at 0 VP loses no VP from an effect that reduces that total. 309.1.b. An ability with a VP cost may be activated only if that entire cost is paid. 309.1.c. If a player has no cards remaining in their deck and fails to draw during their draw phase, each opponent gains 3 VP. 309.2. Scoring is the first step of the end phase. 309.2.a. For each combat zone controlled by a unit the turn player controls, that player gains VP equal to that unit’s influence. 309.2.b. Scoring is mandatory for the turn player’s units in combat zones. 309.2.c. A unit with 0 influence scores 0 VP and still triggers its “On Score” abilities. 309.2.d. “On Score” abilities trigger after all scoring VP have been added.
If multiple On Score abilities trigger, the turn player chooses their activation timing according to 308.2. Order of Operations.

310. Stat Counters / Modifiers

310.1. A counter is a tracker representing a modified state on a card. Counters may be represented by dice, tokens, or another method agreed upon by the players. These counters are distinct from Counter responses during combat. 310.1.a. Card text specifies how counters are added to or removed from the card itself or a target. 310.1.b. Counters remain for the duration specified by the effect or until the card leaves the battlefield. A card that is destroyed, returned to hand, or banished loses its counters and is reset.

310.2. Stat Modifiers

310.2.a. A stat modifier changes a unit’s stats by the stated amount for the effect’s duration.
Example: A +1/+1 modifier increases attack by 1 and health by 1 while it applies.
310.2.b. Apply stat modifiers to a unit’s base stats whenever a stat is referenced by combat, an ability, an action, or another effect.
Example: Guinea Pig, equipped with Disruption Staff, attacks a combat zone containing an enemy Valrathian Dreadnought and an Ashfang Rallypoint (“Units in this zone have 3 base attack and health”). Guinea Pig’s base stats become 3/3 before the equipment’s +1/+1 modifier is applied. Valrathian Dreadnought’s base stats also become 3/3. Guinea Pig survives combat with 1 health remaining.
310.2.c. If a negative stat modifier reduces a unit’s health to 0 or less, that unit is immediately destroyed. 310.2.d. Modifiers may reduce a stat below 0. When a calculation references that stat, use 0 instead of the negative value.
Example: A 2/2 unit receives -3/-0, leaving it with -1 attack. When it deals combat damage, its attack is treated as 0.

310.3. Ability Counters

310.3.a. A card may instruct a player to track a number that increases or decreases. Use dice, coins, or other available markers to track that number, adding or removing counters as instructed by the card.

311. Change of Control / Controller

311.1. An ability, such as that of Nerezza, Umbrasco Scion, may change control of a permanent on the battlefield. A permanent transferred this way is referred to as stolen. 311.1.a. The new controller treats a stolen permanent as their own for control purposes. A permanent’s state is reset before transferring control. (See 802. Common Terminology: Reset) 311.1.b. A stolen unit moves to the new controller’s staging area exhausted. Destroy its attached equipment and remove temporary effects, damage, and counters. 311.1.c. A stolen territory moves to the new controller’s side of the same combat zone. If a territory is already there, destroy it and replace it with the stolen territory. 311.1.d. A stolen item moves to the new controller’s staging area. If it is equipment, it must be equipped to a unit in that staging area. If it is not equipped in this manner, destroy it. 311.2. A change of control does not change a card’s owner. 311.2.a. When a stolen card leaves the battlefield, it goes to the appropriate zone belonging to its owner.
Examples:
  • Returning a stolen unit to hand returns it to its owner’s hand.
  • Destroying a stolen unit puts it into its owner’s graveyard. Its “On Death” effects trigger first.
  • An effect sending a stolen card to the new controller’s supply area sends it to its owner’s supply area instead.

500. Turn Structure

501. Ready, Start, Draw Phase

501.1. Ready phase. The turn player turns all cards on their side of the field upright to ready them. 501.1.a. “On Ready” abilities trigger on units that became ready. 501.1.b. Resolve passive or lingering effects that specify “at the start of your turn.” 501.2. Draw phase. The turn player draws one card from their deck. The starting player skips this phase on their first turn. 501.2.a. During the draw phase, whenever a player fails to draw a card from their deck, each opponent gains 3 VP (Reference 309.1.c.). Arrow Down

502. Main Phase

502.1. During the main phase, the turn player may perform the following game actions in any order, subject to their costs and restrictions. 502.1.a. Extend supply. Once per turn, the turn player may put a card from their hand face down and ready into their supply area. That player then draws one replacement card. This action is called extending supply. 502.1.b. Putting a card into the supply area through an ability effect does not count as extending supply. 502.2. Play cards. The turn player may play any number of cards, provided all applicable costs can be paid. See rule 304.
  • Units enter the staging area exhausted.
  • Equipment must attach to a unit in its controller’s staging area.
  • Tactics produce one-time effects and are put into the graveyard after resolution.
  • Territories are played directly into combat zones. A new friendly territory destroys and replaces an existing friendly territory in that zone. See rule 102.5.
502.3. Activate abilities. The turn player may activate abilities of cards on the board by paying the costs stated in their ability text. 502.4. Attack with units. A ready unit in the staging area may move into a combat zone as an attack. This immediately initiates a combat phase. Resolve that combat phase before the turn player takes their next action. 502.5. Retreat units. A ready unit in a combat zone may become exhausted to return to the staging area.

503. Combat Phase

503.1. A unit entering a combat zone begins a combat phase unless it is joining combat already in progress under rule 503.2.d.2, returning to its origin under rule 503.6.d, or being returned to staging because a friendly unit already controls the destination under rule 201.4. The entering unit is the attacker. The unit already occupying that zone, if any, is the defender. Perform the following steps in order. 503.1.a. Ability step. Calculate applicable stat bonuses, territory effects, item effects, and passive bonuses from card text for the attacker, then for the defender. 503.1.b. “On Attack” and “On Defend” abilities trigger. The turn player’s unit would add their effects onto the stack first. This effect stack resolves before moving on. 503.2. Counter step. The defending player may make a Counter response, beginning a Counter stack. Players may respond to an opponent’s Counter response with further Counter responses. 503.2.a. Counter responses may include playing Counter cards, activating unit abilities, and turning face-down territories face up. The responding player must pay all applicable costs to play a card on the counter stack. 503.2.a.1. A card played as a Counter response enters the battlefield only when its entry on the stack resolves. 503.2.a.2. “On Play” abilities trigger when a card is successfully played. “On Enter” abilities trigger when a permanent enters the battlefield, whether it was played or put there by an effect. Placing a card on the Counter stack does not itself play that card or cause it to enter the battlefield. If resolution both plays a card and causes it to enter, add its “On Play” triggers before its “On Enter” triggers, as specified in rule 304.1.b. 503.2.b. Whenever a Counter response is made, opponents receive priority to respond. If all opponents decline to respond, resolve the stack. 503.2.c. Resolve the stack in last-in, first-out order before combat resumes. 503.2.c.1. If an additional ability triggers during resolution, add its effect to the stack and resolve it immediately. See rule 308 for resolution order. 503.2.d. Participant replacement. Effects resolving on the stack may forcibly move units. 503.2.d.1. An attacker or defender that leaves the combat zone loses that designation. 503.2.d.2. A unit put or moved into the combat zone during the counter step joins that combat. If the other unit is the attacker, the entering unit becomes the defender controlling the zone. If the other unit is the defender, the entering unit becomes the attacker. 503.2.d.3. A unit moved into ongoing combat joins only if an attacker or defender position is vacant and it is an enemy of the remaining participant. If both positions are occupied, the movement into that zone is not performed; resolve the rest of the effect normally 503.3. Target validation. After the counter step, if either the attacker or the defender is absent, skip the combat damage step and proceed to rule 503.5. 503.4. Combat damage step. The attacker and defender deal combat damage to each other simultaneously. 503.4.a. Combat damage is damage dealt between the attacker and defender during this step. Determine that damage using the unit’s attack stat and applicable stat counters and abilities. 503.4.b. Only ready units deal combat damage. 503.4.c. A surviving unit retains damage until the end of the turn. 503.4.d. A unit that attempted to deal combat damage becomes exhausted, even if it attempted to deal 0 damage. 503.5. Resolution step. Determine the outcome of combat as follows. 503.5.a. If only the attacker remains in the combat zone, it takes control of that zone. 503.5.b. If both units survive, the attacker returns to the zone from which it attacked. Control of the combat zone does not change. 503.5.c. If only the defender remains, control of the combat zone does not change.
Example: Wyrmscar Dragon has “On Attack: Deal 2 damage to the defending unit”. If this ability destroys the defender before the combat damage step, combat proceeds to resolution without combat damage being dealt. Exhaustion from attempting to deal combat damage does not occur.

503.6. Restrictions & Edge Cases

503.6.a. Recursive combat. An ability may initiate an attack during another combat phase. A combat zone in which combat is already in progress cannot be targeted for that attack. 503.6.b. Participants. A combat phase may have no more than one attacker and one defender. A unit that leaves the combat zone loses its attacker or defender designation. 503.6.c. Restricted zones. A unit cannot attack a combat zone that contains a friendly unit or in which combat is already in progress. 503.6.c.1. Ability effects may impose additional restrictions on which combat zones may be attacked, such as Provoke.
Example: Provoke requires an attacking unit to target a combat zone containing an enemy unit with Provoke. An attempted attack against a different combat zone fails because it does not satisfy that restriction.
503.6.d. Return to origin. A unit that fails to win a combat zone returns to the zone from which it came. 503.6.d.1. Returning to a zone is not an attack. 503.6.d.2. If the unit would return to a combat zone that is occupied or that it cannot legally control, it returns to the staging area instead. 503.6.e. Combat phases can’t be started during the End Phase. Attempts to make an attack during an End Phase will fail. Arrow Down

504. End Phase

504.1. The end phase begins when the turn player declares the end of their turn. Perform the following steps in order. 504.1.a. Scoring. Add the total influence of friendly units in combat zones to the turn player’s VP total. After scoring is complete, “On Score” abilities trigger for all units that participated in scoring. 504.1.b. Damage reset. Remove damage from all units. 504.1.c. End-of-turn effects. Resolve passive or lingering effects that specify “at the end of your turn.” 504.1.d. Hand limit. If the turn player has more than 10 cards in hand, that player discards until they have 10 cards in hand. 504.1.e. Victory check. If the turn player has at least 20 VP, that player wins the game. 504.2. After the end phase, the next player begins their turn with the ready phase.

800. Keyword Glossary

The following tables define trigger phrases, common terms, and keyword abilities. Numbered rules provide the associated procedures and restrictions.

801. Ability Activation Phases

TermDefinition
”At the END of turn”Triggers after scoring and immediately after damage is reset. Applies to abilities using the phrase “end of your turn.” See rule 504.1.c.
”At the START of turn”Triggers after cards are readied and before the draw phase. Applies to abilities using the phrase “start of your turn.” See rule 501.1.b.
On AttackTriggers when the unit attacks a combat zone, during the ability step.
On DeathTriggers when the unit is put into the graveyard from the battlefield.
On DefendTriggers when the unit defends against an attacker, during the ability step.
On EnterTriggers when the card enters the battlefield from any zone.
On FlipTriggers when the card is revealed from a face-down position.
On PlayTriggers when a player performs the play-a-card action and the card enters the battlefield, with all required costs paid. Effects may permit play from zones other than the hand.
On ReadyTriggers when an exhausted card becomes ready.
On RetreatTriggers when a unit retreats from a combat zone.
On ScoreTriggers for units that participated in scoring after VP have been added during the first step of the end phase.

802. Common Terminology

TermDefinition
(Stat) Attack / ATKThe stat used to determine damage dealt in combat.
(Stat) Health / HPThe stat indicating how much damage a unit can survive.
(Stat) InfluenceThe stat determining VP earned by a unit in a combat zone during scoring.
AbilityA card’s effect text.
Banish(ed)Remove a card from play by putting it into the banish pile rather than the graveyard. A unit leaving the battlefield loses its counters, equipment, and added card text.
Combat DamageDamage dealt between the attacker and defender during the combat damage step.
Control [zone]A player’s control of a combat zone through occupation by their unit. Control is lost when no friendly unit remains in the zone. During combat, control transfers after the resolution step.
ControllerThe player currently able to play, manipulate, or move a card. A card’s controller may differ from its owner. A unit leaving the battlefield goes to its owner’s appropriate zone.
CounterAn ability usable during the counter step in response to an attack or another Counter response. See rule 307.2 for qualifying responses.
Destroy(ed)Send a card to the graveyard. A unit leaving the battlefield loses its counters, equipment, and added card text.
Discard(ed)Move a card from hand to the graveyard.
EffectThe result of an ability, Counter response, tactic, or unit text.
Exhaust(ed)The sideways state of a card. An exhausted unit cannot attack, perform the retreat unit action, deal combat damage, or pay a cost requiring it to exhaust. Exhaustion does not prevent its abilities from triggering or dealing noncombat damage. An activated ability may be used if all its costs can be paid.
Force RetreatReturn a unit to its controller’s staging area exhausted. A retreat caused by an ability is not a unit action and does not require the unit to be ready.
MoveMove a card to a specified location.
OccupyA unit occupies a zone when it is alone in that zone or defending it.
OwnerThe player who brought the card into the game as part of their deck, as defined in rule 102.1.a. Ownership does not change when control changes.
ReadyThe state in which a unit may perform an action and deal damage.
ResetRemove temporary effects, targeted effects, added text, counters, and damage from target permanent. Destroy equipment attached to it.
Sacrifice(d)Choose a friendly unit, territory, or item on the battlefield and destroy it, putting it into the graveyard.
SupplyThe resource spent to play cards. A card’s supply cost is the number in its upper-left corner.
Turn PlayerThe player whose turn is in progress. Also known as “active player”
Unit Action - Activate AbilityPay all required costs to activate a unit’s ability.
Unit Action - AttackMove a unit into a combat zone as an attack, even if the zone is empty. A unit cannot attack a zone containing a friendly unit or an ongoing combat phase.
Unit Action - RetreatMove a unit from a combat zone to the staging area and exhaust it.
UnoccupiedA combat zone containing no units.

803. Bolded Keywords

TermDefinition
BlitzThis unit enters ready.
FlankingThis unit may attack from a combat zone once per turn, including while it controls that zone.
FortifyOn Defend: You may discard a card with matching affinity to ready this unit.
Glory XWhenever this unit destroys a defending unit through combat damage, its controller gains X VP.
Impede XOn Defend: The attacking enemy unit gets -X/-0 for this combat.
ProvokeWhile this unit controls a combat zone, opponents must target a unit with Provoke when attacking.
SwiftThis card may be played as a Counter response.

Patch Notes

For the chronological record of changes and addenda to the comprehensive rules, see the Patch Log.